You will find here the information about our latest releases.

---

Version 9.4.12 - 2021/02/08

FEATURES

Common

• Added support of auto-framing on Sony H800 and X1000 cameras.
• Added a checkbox in the audio mixer popup to deny changes to mute and global gain from outside the audio mixer popup
• The Audio Mapping can now be edited directly from the audio mixer popup (with the exception of preview outputs which are already in the audio mixer itself, and without being able to change merged channels as this one can’t be done live)
• The “TITLER” button is now hidden when only InSitu, E-Learning or Tracking are licensed
• Starting the COMPOSER module from the dashboard will now load InSitu compositions when only InSitu is licensed
• Starting the COMPOSER module from the dashboard will now load E-Learning compositions when only E-Learning or Tracking is licensed

Radio/Conf

• Added a 5 second timer when going in and out of Settings
• Auto-framing done when Reframing in the “Rich director” IA mode is now performed immediately instead of being delayed until specified preset must be live

Pilot

• Added an auto-framing button for supported cameras

API

• Added a SignalR event to notify of a media description being updated and providing the owning medialist’s ID
• Added a REST route to update a media by specifying the owning medialist’s ID and the new media description. Only In/Out, Audio mode and After play mode are read from this route

BUGFIXES

Common

• Fixed typo in “Initializing” screen
• Fixed incorrect image analysis during auto-framing on 720 p/i video feeds
• Avoid a deadlock that may occur when cleaning-up a Medialist

Radio

• Fixed RadioProgramReceiver and Netia connection not being correctly retrieved in case of physical disconnection

Radio/Conf

• Fixed list of Scene sets not being refreshed when a scene set is added, removed or renamed
• The popup asking the password will now display the current module’s title

InSitu

• Fixed freeze when quitting InSitu after having used the BLACKOUT feature

Composer

• Fixed DUPLICATE composition set button being usable even in a restricted use case (InSitu, E-Learning & Tracking)

---

Version 9.4.11 - 2021/01/25

FEATURES

Common

• Added support of Panasonic AW-UE70 camera.
• Better support of Panasonic AW-UE150 camera.
• Medialist can now be sent through NDI.

Radio

• Automatically try to reconnect to Program source after failure.

API

• Added a route to move an item in a Medialist by providing its old and new indices.

BUGFIXES

Common

• Removed “Continuous” stream type for Facebook as this feature has been removed from Facebook LiveVideo API.
• Do not display “Auto Framing” button for unsupported cameras.
• Fixed loss of selected output device for Medialist after having redetected hardware.
• Fixed display of a confusing message when trying to start an ISO Rec on a source that is not available.
• Audio gain of PGM was not displayed in main interface.
• Fixed a crash that may happen on Medialist when trying to update the OnNext behavior.
• Fixed a rare crash that can occur when changing Scene File to a new Scene set that do not contain any Titler element.

CONF

• Fixed a crash that may occur when trying to get channels of BIAMP Tesira blocks that does not contains any channel.

Titler

• In editor, when renaming a text zone, name of the zone is now correctly updated in preview.

---

Version 9.4.10 - 2021/01/18

FEATURES

Conf

• Added support for Biamp Tesira

---

Version 9.4.9 - 2021/01/11

FEATURES

Common

• Updated splash screen for 2021

In Situ

• Replaced the word MARKERS in settings by TAGS to be consistent with the live view

API

• Added a route to add a media by providing a full description (which may fail if the provided ID matches another entry in the specified medialist)
• Added “tag” variant of In Situ’s “marker” routes

BUGFIXES

Common

• Fixed a critical bug due to a component trying to load Flash after it has been deprecated. This resulted in the impossibility to start any module.
• Fixed an occasional crash that may happen when closing a module while using a VideoHub

Conf

• Fixed support of Televic D-Cerno

Composer

• Playlists created from a composition are now correctly unloaded when the composition file is unloaded

---

Version 9.4.8 - 2020/12/30

 

FEATURES

Common

• Added audio delay for external data sources. You can set them in the Audio mixer when Studio or another module is running.
• BlackMagic drivers are now checked to be the exact one we specify (instead of checking a minimum version)

Composer

• Removing the restriction on an element’s aspect ratio will now automatically set the element’s format to “Custom”

Radio/Conf

• Video previews are now shown when using a video hub

API

• Added a SignalR event when starting a module specifying which module is started and which room was selected

 

BUGFIXES

Common

• Fixed input video format not being respected when adding a new input video device

Radio

• Fixed cameras used by a video hub being tagged as unavailable in Radio when there are more cameras than inputs used in the Multicam. When route management is required, Radio will now work correctly again.

Composer

• Fixed wrong word used when assigning cameras in Composer. We’ll now display “assignment”

---

Version 9.4.7 - 2020/12/14

FEATURES

Common

• Added a button to clone the current room in the settings
• It is now possible to navigate a mCam II menu from Multicam Studio

BUGFIXES

Common

• Fixed the split record duration not being correctly saved when closing the record settings popin while the cursor is still in the split duration field. This bug only happened in the small settings popin accessible from a live module, not the main settings.
• Fixed incorrect exposure mode reading from Sony BRC-H800 and X1000 when a color matrix was set
• Fixed a crash that could happen in certain places (main pain point was an Assist importer) when trying to display an image which cannot be read

Composer

• Fixed a crash that would happen when cloning a newly created composition containing a Medialist element in “External Data” mode

---

Version 9.4.6 - 2020/12/01

FEATURES

Editor

• Added an option to enable audio when the video is paused. This allows to play while navigating the video either frame by frame or by moving the video’s position cursor.

Pilot (beta)

• Right clicking a video source will now allow you to choose the video source format

BUGFIXES

Common

• Attempt at fixing split records sometime failing when the first split happens

Studio

• It is now possible to TAKE a source that is used in a currently live composition without first having to UNTAKE the composition and be forced into whatever source was live before

---

Version 9.4.5 - 2020/11/16

BUGFIXES

Common

• Fixed deleting a publishing workflow that is currently selected in the “end of record” window resulting in a crash
• Fixed impossibility to create Facebook streams due to Facebook removing the VOD option. As such, it is now also removed from Multicam.

Composer

• Composer will now always offer the maximum number of cameras over all rooms (instead of only allowing the number of cameras in the previous start of eg. Studio)

Medialist, Assist

• Fixed “after play” mode (stop, next, loop) that could be ignored in some edge cases

---

Version 9.4.4 - 2020/11/02

FEATURES

API

• Added the following route to get a medialist by its ID: /api/v2/medialist/selected/{medialistId}

BUGFIXES

Pilot

• Fixed wrong speed when playing the return part of a sequence in ping-pong mode
• Fixed crash happening when trying to edit multiple fade modes of different movements

---

Version 9.4.3 - 2020/10/19

FEATURES

Composer

• Added Composer V2 API. More robust implementation based on ID.
• Added new SignalR notifications for Composer with ID.

BUGFIXES

Composer

• Check consistency of Composer elements’ IDs.

Radio/Conf

• Automation: check state of variable is still accurate when executing command after a delay.
• Fixed reframing/preset edition in live after camera detection not working.

---

Version 9.4.2 - 2020/10/05

FEATURES

Common

• The “Send to support” button is now disabled for a short time after sending a message

Assist

• Importers’ option “Replace all existing data” is now saved

Radio/Conf

• Disabled AUTO/MAN switch for 15 seconds after a toggle. This will stop errors happening when switching in bursts.

Pilot (beta)

• Added an indication of the currently live camera on Panasonic HE130 & UE150 as long as the external mixer enable their tally

BUGFIXES

Common

• Re-centered cameras’ name in Studio
• Fixed Epiphan video source being incorrectly tagged as inactive
• Fixed crash in case of corrupted configuration file

Composer

• Fixed impossibility to add media items in a composition’s medialist when the Composer was opened from a live module (ex. from Studio)
• Fixed the AUTO PLAY option not being applied when set in a composition’s medialist

Titler

• Fixed silent error when selecting a file as the background in the Titler editor

Radio/Conf

• Fixed a deleted scene set being still shown in the Radio live UI in a particular use case
• Fixed automatic camera redetection following an error resulting in cameras being always unavailable until Radio/Conf was restarted
• Fixed the “Embedded AudioDetector” console not working properly since the 2 last versions (since 9.3.14)

---

Version 9.4.1 - 2020/09/21

FEATURES

API

• Added a route to be able to pre-load a media in the medialist (POST on api/v2/medialist/{playlistId}/{playlistItemId}/select)

Assist

• Selecting a media in the medialist will now apply the selection to Multicam's internal medialist

Radio/Conf

• Added a "mic zoom" slider to customize the size of the microphones in the studio set visual

Pilot (beta)

• Multicam Pilot provides users with advanced robotic head control. Multicam Pilot is compatible with Polyscope products (Ovni/Buggy sliders and Babycam) as well as the Panasonic PTZ HE130 and UE150.
  The system, which pilots up to six robotic cameras, features an intuitive user interface and is easy to use. Thanks to preset, position and advanced sequence recalls, just one operator can run the entire operation smoothly and benefit from many dynamic framing options.

BUGFIXES

Common

• Fixed mCam2 manual exposure and white balance values not being retrieved correctly when starting Studio (the camera values were correct, just the UI was not displaying the expected values)

Radio/Conf

• Fixed missing configuration save when a reframing done in live creates a new preset. This happened when editing a preset shared between at least 2 preset banks.
• You can now correctly define various links based on the scene set. Previously changing the scene set would forget the linked scenes.

---

Version 9.4.0 - 2020/09/08

FEATURES

Common

• Updated Medialooks to 2.3.0.11963
• Minimum BMD drivers requirement moved up to 11.5.1

---

Version 9.3.14 - 2020/09/08

Important: this is the last version supporting windows 7

FEATURES

Common

• Duplex mode is now forced on BlackMagic DeckLink 8K
• Trying to improve composition switching by keeping elements shared between live composition and the composition going live

Assist

• Improved speaker performances when: adding, updating, deleting and drag and dropping rows.

Radio/Conf

• Fixed a hardware preset being re-used when editing a preset and changing the active camera thus being able to erase another, currently used, preset number

Titler

• Added ticker "roll" mode

BUGFIXES

Common

• Fixed removing a hybrid element from a multi-element camera configuration not restoring capabilities handled by the removed device
• Fixed audio issues due to setting the volume very close to 0 but not 0
• Fixed mCam2 implementation to really offer the full 255 hardware presets
• Fixed a crash that could happen when using an external audio source in a room using a VideoHub
• Fixed a crash that could happen when trying to send an error report

Radio

• Fixed titler element that could misbehave in some very specific situations triggered by using titling automation and manually using scenes in assist
• Fixed possibility to remove the wrong item from the automatic playlist in some extremely rare cases

Conf

• Fixed retrieval of a Bosch DCN NG units when there are a lot of them
• Fixed inability to connect to Bosch DCN NG in Conf wizard

Radio/Conf

• Fixed "warning" icons being visible on cameras while in the wizard for a new configuration
• Fixed a crash that could happen when resetting a configuration due to hardware presets not being restored
• Fixed being able to use a studio preset in radio when removing a preset that was created by using this option, but after the studio preset sharing option have been toggled off
• Fixed handling of non-contiguous microphones that could happen after tweaking the configuration
• Fixed a few errors that could happen when trying to simulatenously connect and disconnect from a console (this happens when entering/leaving settings too fast or switching too fast between auto and manual mode)
• Fixed broken AI/Video mixer synchronization when forcing a camera manually while in a composition with a specific camera set, and switching to another composition using the PGM
• Restored ability to go live on a Facebook stream
• Fixed UI not being refreshed after creating a new post for a Facebook stream

Assist

• Fixed loss of speakers' selection between two executions
• Fixed concurrent access to customization file which could result in loss of a recent change
• Fixed infinite spinner on UPDATE ALL button when taking an empty scene
• Fixed a media showing a duration of 0 after being added
• Fixed ability to remove a live item using mass deletion
• Fixed media's in/out point being reset after restarting Multicam

Scenes

• Fixed a crash due to duplicating a scene set where one of the scene had its snapshot deleted

Titler/Composer

• Fixed inability to specify a color or special background in Titler and Composer windows

Titler

• Fixed default Ticker's line width to 90%
• Fixed badly formatted ticker element resulting in unexpected behavior

---