You will find here the information about our latest releases.

The required drivers versions for the 10.3 releases are:

• Blackmagic's drivers accepted:
  • 14.3
  • 14.4 & 14.4.1
  • 14.5 (but those didn't went through much real world testing; use them if you have an issue that you think are due to the drivers)
• (optional) To enable 3 GPU encodings on the nVidia P6xx, please use at least to the December 2022 version: R525 U2 (527.27)

Version 10.3.12 – 2026/02/19

FEATURES

General

• Updated copyright to 2026.
• Added support for Lumens VC-R31.

Conf

• Add ability to feed the names of the participants in a new Titler group when using a Televic Confero system. This requires the creation in Titler of a new “Audio speaker” rich data group.

Api

• (PILOT) Added a route to explicitly stop any sequence running on a given camera.
• (PILOT) Added a parameter to both the prepare and play sequence routes to change the viewed sequence in the user interface. This is an opt-in behavior.
• (PILOT) Added a parameter to the play sequence route to enable ping-pong.

BUGFIXES

API

• (PILOT) Fixed route to stop a specific sequence instead stopping any sequence running on the specified camera.
• (PILOT) Fixed ability to start multiple sequences simultaneously on the same camera when multiple play routes are executed almost at the same time.

Version 10.3.11 – 2025/12/17

FEATURES

General

• Add support for Panasonic AW-UE150A.
• Add instantaneous auto-framing support for Panasonic AW-UE150A
• Add instantaneous auto-framing support for Panasonic AW-UE160

Pilot

• Add a scrollbar when the number of devices exceeds n×3, where n is the monitor count.
• Handles alert sent by Spirit devices to stop sequences in case of error.
• Add sequences support for Panasonic AW-UE150A.
• Add sequences support for Panasonic AW-UE160.

Api

• Added REST API, currently limited to sequences on the active bank. This API will be enriched soon.

BUGFIXES

Radio

• Fix an issue where Speaker / Panel content was cleared during an update due to the linker update after a line was deleted in Assist.

Radio / Conf

• Fix a crash when duplicating a preset bank that contains a corrupted preset thumbnail

Pilot

• Fix a crash when cancelling sequence duration editing.

Version 10.3.10 – 2025/11/17

FEATURES

General

• Add support for Canon CR-N400.

Studio / Radio / Conf

• Improved streams error handling so that errors are easier to notice.

Pilot

• Sequences and transitions will be stopped when played on an unresponsive SPIRIT device.

BUGFIXES

General

• Fix preset save failing on updated Sony ILME-FR7.
• Fix iris range retrieval on the Sony ILME-FR7
• Fix auto-start not triggering the start.
• Fix a crash when trying to add an audio source with more than 8 channels. If someone tries to do that, it’ll instead only apply the first 8 audio channels of the source, and display a message reporting this limit.
• Fixed an extremely rare crash when closing a module.

API

• Trying to switch RADIO/CONF automation mode while the module is in the settings will now result in a 400 Bad Request instead of resulting in a crash.

Titler

• Fix a rare crash when using an RSS title and the title set end up being reloaded due to a previous error.

Tools

• AudioDetector: Fix UI massively slowing down when opening the audio devices list.

Version 10.3.9 – 2025/09/29

FEATURES

General

• Added a Streaming catalog selector in Studio. You can now choose the Streaming catalog directly without opening the Streaming configuration, similar to Titler and Composer.
• Misconfigured Auto Start no longer blocks module launch.

Pilot

• Added support for Canon CR-N300.
• Added support for 128 zoom speed steps in Sequence for Canon cameras.

BUGFIXES

General

• Fixed unnecessary commands being sent to Canon cameras when PTZ speeds did not change.
• Fixed (S)FTP publish task not working (introduced in 10.2.11).
• Fixed incorrect color space applied to Mixer, which could lead to higher CPU usage.

Radio / Conf

• Fixed software presets using the same preset count as hardware mode at module launch, which invalidated the configuration after restart.

Conf

• Fixed silent NRE after a disconnect / reconnect scenario when using ATDM consoles.

Titler

• Fixed Z-layer not being correctly reflected in the editor after drag & drop.

Pilot

• Improved sequence accuracy for Canon cameras.
• Fixed sequence stop for Canon cameras.
• Fixed zoom not starting in long-duration sequences with Canon cameras.

Assist

• Fixed changes to “audio mode” and “after play mode” in Studio not being reflected in Assist.

Version 10.3.8 – 2025/09/11

FEATURES

General

• Added support for Panasonic AW-UE80 camera.
• Use the accuracy returned by Robotics devices to better detect the end of preset recall.

API

• Added new route to start/stop ISO recording per source.

BUGFIXES

General

• Fixed an issue where the focus position was not recalled when using software presets on Canon cameras (introduced in 10.3.2).
• Fixed erroneous log entries in Audio-Technica ATDM.
• Fixed company name display in Synchronizer and Tracker setups.

Radio

• Automation: Fixed an issue where triggers with an offset of 0 would not fire (introduced in 10.1.0).
• Fixed partial message handling in Multicam REST playout (introduced in 10.2.11)

API

• Fixed an issue preventing rows from being added to a speaker or panel (introduced in 10.2.11).

Titler

• Fixed an issue where the ticker RSS proxy server was unavailable if the API was restricted by an API key.
• Enhanced ticker RSS proxy server security: it can no longer serve local files.

Version 10.3.7 – 2025/08/13

FEATURES

General

• Updated facebook API version to v23.
• Windows & NVIDIA versions are now logged when starting.
• Reduced number of logs generated when auto-framing.

BUGFIXES

General

• Fixed freeze induced by recalling software PTZF position on Sony cameras (introduced in 10.3.2).
• Fixed potential crash when stopping an extract while the recording is paused.
• Fix a rare crash when a playlist file is added while a module is being shut down.

Radio

• Fixed Radio AI recalling a software preset in a loop as long as it wasn’t finished.

Titler

• Added workaround to allow a ticker in RSS mode to still refresh its content when the content is unavailable (such as a server being temporarily unreachable). This workaround is automatic, but requires the Multicam API to be enabled.

Pilot

• Fixed the Canon CR-N100 not showing the “incompatible camera” message.

Version 10.3.6 – 2025/06/12

FEATURES

API

• Added a medialist route to play a media by using its index. The index starts at 0, which means to play the first media you must supply 0 as the route’s index.

BUGFIXES

General

• Fix an extremely rare crash in VISCA cameras code when retrying to send a command that failed to be sent.

Version 10.3.5 – 2025/06/10

BUGFIXES

General

• Fixed rooms list in AutoStart settings being empty after the section was displayed once.
• When autostart is active, it becomes impossible to manually select a room. This fixes the possibility of a very specific issue where the manual room selection is partly overwritten by the autostart room.

Studio

• Fixed button to change the current ticker file going out of screen.

Version 10.3.4 – 2025/05/21

FEATURES

Pilot

• Added a shortcut to toggle the fullscreen preview on the piloted camera.

BUGFIXES

General

• Fix a failure to create and start a renderer making the remaining output unavailable.
• Fixed a rare crash when trying to set transition options on an unusable playlist.
• Fixed ability to trigger multiple times the “save” button in the API settings. This would result in an error but shouldn’t have any further consequences.

Radio / Conf

• Fixed a rare crash when entering configuration with an unusable camera that wasn’t properly initialized.

Version 10.3.3 – 2025/05/13

FEATURES

General

• Added support for the Sony SRG-A40.
• Added support for the Sony SRG-A12.

BUGFIXES

Studio

• Fixed a crash when a panel filter is active and the filter is or includes an apostrophe.

Titler

• Fixed a crash when cancelling image selection in a Music group.
• Fixed a ticker file path being too long shifting the load button out of screen.

Version 10.3.2 – 2025/04/24

FEATURES

Titler

• Now accepts a namespace in an RSS source to support additional text and image fields to entries.
  • Add xmlns:multicam="http://multicam-systems.com/rss" to the RSS
  • Use multicam:text1 to multicam:text6 to add texts
  • Use multicam:image1 to multicam:image6 to add images

Debriefing

• Unused markers will no longer be listed.
• Improve readability of the timeline zoom levels and ticks. It is now rounded to the next second. For example, a zoom level won’t be 1.54 seconds, it’ll be 2 seconds. This means the visible ticks will match the expected times since they were themselves already rounded to the second.

BUGFIXES

General

• Try to resist against a graphic driver bug which would freeze the UI by stopping to refresh previews when we can’t access their texture anymore.

Studio

• Try to fix a crash that would happen when being able to delete the same media twice in a very short time.

Debriefing

• Fix video replay being unusable when there are too many markers declared. Visible markers are now capped at 4 and add a scrollbar to navigate in the list.

Version 10.3.1 – 2025/03/31

FEATURES

General

• Upgraded to .Net 8.
• Updated audio/video engine to 2.9.2.14004
• Updated minimum Blackmagic drivers versions required. We accept one of the following
  • 14.3
  • 14.4 / 14.4.1
  • 14.5 (but there haven’t been a lot of tests; use them if 14.4 / 14.4.1 is giving you trouble)
• Added a new backend to find faces when using auto-framing which requires an external license.

BUGFIXES

General

• Remove unsupported VISCA call (near focus limit inquiry) on MCam 3.
• Fix Panasonic cameras initialization not waiting for all commands sent to the camera to be processed.
• Fix using a media as an intro/outro in a publish workflow being inverted, and the sound being removed (if any)