You will find here the information about our latest releases.

---

Version 9.5.17 – 2021/12/13

FEATURES

Common

• Added support of Blackmagic Ultra Studio device

Radio

• Added video file support to Dalet Galaxy

BUGFIXES

Radio

• Fixed tally handling of Sony BRC series when used via IP

Radio

• Fixed shutter issue when editing presets made with Panasonic cameras
• Fixed missing display of AudioDetector app version

---

Version 9.5.16 – 2021/12/01

FEATURES

Common

• Upped number of frames to wait before a medialist is considered stuck (from 2 to 3)

Radio

• Optimized automatic playlists to try to only interact with the relevant playlist for a given playout message
• A “next song” is now considered a “next item” by default and thus will now be displayed again under NEXT on the live Radio UI
• WinMedia is no longer tagged as a Prototype

BUGFIXES

Radio

• Fix playout metadata which could be ignored when changes do not trigger a scene change (bugged since 9.5.6)
• Improved Radio Program Receiver log reliability with burst playout communication

---

Version 9.5.15 – 2021/11/15

BUGFIXES

Studio

• After changing the Audio input delay from the source configuration accessible from Studio’s preview, the audio delay from the mixer now correctly shows the adjusted delay.

Conf

• Fix a silent exception that could happen since 9.5.14 when starting Conf

---

Version 9.5.14 – 2021/10/04

FEATURES

API

• Created v2 API for Radio and Conf controllers. It brings clearer control over the current and desired direction mode, as well as the ability to know the duration during which automation is disabled while a microphone is forced live.
• Added SignalR event to notify that zero, one or more microphones are in the live preset: OnMicrophoneStateChanged(MicrophoneStateInfo micState)

Radio

• Added a “Scenes List” as Program link’s targets. Multiple scenes can be chained this way with a custom duration (where ‘0 seconds’ is a way to stop the list from looping and keep this scene active until no longer required)
• Added an option to disable the forced update of Titler data when a Program event is received
• The “Next Song” is now displayed in RadioProgramReceiver

BUGFIXES

General

• Fixed UI issue when a preset uses the “OFF” shutter mode on the Panasonic UE150

Conf

• Fixed auto-titling broken in 9.5.13

---

Version 9.5.13 – 2021/09/17

FEATURES

General

• Added an input binding to invert pan, tilt, zoom and focus at will
• Added an input binding to adjust focus jog speed

API

• Added a route to get the machine’s and Multicam’s names (/api/application/system)
• Added a route to get the current status of the auto-titling (/api/radio/autotitling or /api/conf/autotitling)
• Added a route to enable or disable auto-titling (/api/radio/autotitling?enable=<true/false> or /api/conf/autotitling?enable=<true/false>)
• Added a SignalR notification when auto-titling configuration has been changed (including enabled/disabled): OnAutoTitlingConfigUpdated(AutoTitlingInfo)

Radio/Conf

• It’s now possible to toggle auto-titling off

Radio

• Adjusted Dalet Galaxy communication recovery in case of a truncated message
• RadioMetadataManager: It’s now possible to copy the ISRC to the cover field

BUGFIXES

General

• Fixed impossible recording on an (Ex-)FAT drive

Radio

• RadioMetadaManager: fixed display of the tool’s version

---

Version 9.5.12 – 2021/09/08

FEATURES

General

• Shutter speed can now be set to OFF on the Panasonic UE150
• Toggling exposure between man and auto will toggle the Panasonic shutter between ELC and Step
• Added an explanation of how to format SRT input streams
• The room identifier can now be seen with a tooltip when the mouse if hovering the Room’s name in the settings.

API

• Access to InSitu, Studio, Scene, Medialist and Publisher’s thumbnails no longer require authentication (this allows those requests to be put in an img node’s src attribute)

Radio/Conf

• All [PROTO] devices’ integrations are now hidden unless they’re ready to be tested in the wild

Radio

• Buttons to create links and scenes are now more explicit

BUGFIXES

General

• Fixed a crash when adding a video hub introduced in 9.5.11
• Fixed potential error when starting Multicam due to concurrency issue when preparing recorders/streamers

Assist

• Fixed a crash that would happen in the integrated mode when initializing a medialist

Radio / Conf

• Fixed ability to associate a panel or speaker to the active microphones without having to authorize the action when Titler access is restricted by password

Pilot

• Fixed initialization error when no usable cameras are available

---

Version 9.5.11 – 2021/08/11

FEATURES

Pilot

• Added some error detection: on/off state, homing not done. If any happen, a clickable exclamation mark will appear beside the camera name or preview.
• Unavailable optic parameters will now be hidden if the selected input doesn’t support them

BUGFIXES

Conf

• Fixed list of microphones’ mappings not being cleared when switching between two specific consoles during the wizard
• Fixed wizard not being resume-able when the selected system is Sennheiser ADN CU1
• Improved mapping prompts on Sennheiser ADN CU1 and Shure Mxa910

Radio / Conf

• Fixed using up/down keys in the preset editor which could change the active preset

Titler

• Fixed the “Force upper case” text zone option not being applied when the initial loading is done in the Titler editor

---

Version 9.5.10 – 2021/07/26

FEATURES

Studio

• Added an option to hide anything related to live (except for recording due to ISO rec feature)

Conf

• Removed “zoom” button from live page as it’s not yet implemented

BUGFIXES

Radio / Conf

• Fixed microphones zoom +/- buttons setting the zoom immediately to maximum and minimum

---

Version 9.5.9 – 2021/07/12

FEATURES

Conf

• Added support of new conference system: Sennheiser AND CU1.
• Added support of new conference system: Shure MXA910.

Radio

• Dalet Galaxy is now officially supported.
• We have added new Custom radio program category mapping mode for Dalet Galaxy. In configuration, if you choose Custom mode, you can now edit mappings for field TitlePrimaryCategory.
• We have simplified XML parsing of Dalet Galaxy, so that unused fields with incorrect format will not break parsing anymore.

Common

• You can now edit video filters when editing video format of a video input.
• Blackmagic VideoHub mapping configuration is now stored in its own file.

BUGFIXES

Common

• Fixed Composer Playlist out of synch when removing items.
• Fixed wrong Recording/Streaming format after having using “Test Streaming” functionality.

Assist

• Fixed rare crash that may occur when initializing Assist.

---

Version 9.5.8 – 2021/06/28

FEATURES

Assist

• Added busy indicator when a Medialist is loading, preventing user to try to use it before it is ready.

Radio / Conf

• After a reset of camera controls, AI will now invalidate presets so that camera do not stay on home position.

BUGFIXES

Common

• Fixed AutoFraming when Panasonic camera is flipped.

Pilot (beta)

• Fixed Transition / Sequence when Panasonic camera is flipped (except AW-UE150, fix will come later).

---

Version 9.5.7 - 2021/06/14

FEATURES

Radio

• Added custom mapping for image fields of Radio Program Titler component. You can now build a mapping with variables, for example D:\Images\%CurrentShowTagLine%.png will look for an image in D:\Images directory, named with value of CurrentShowTagLine variable, with a png extension.

Pilot (beta)

• Added virtual joystick. To enable it, go in Controller management settings. You will then have a button in Optic block header to open virtual joystick.
• Redesign of advanced camera settings, and moved button to open it in Optic block header.

BUGFIXES

Common

• Fixed loose of selected Titler/Composer/Scene file after undo.

Pilot (beta)

• Fixed crash when creating a new bank.

---

Version 9.5.6 - 2021/05/28

FEATURES

Common

• Changed the displayed version in help center and other places displaying it

Composer

• Added a LOOP option to static playlists to automatically play the first item after the last has played if the last item play mode is “next”

Pilot (beta)

• Added pedestal support for HE130 and UE150. They are accessible when clicking in the WHITE BALANCE header and this will collapse the FOCUS and EXPOSURE settings. Clicking on their respective headers will get you back to the normal UI.
• Added support for VAR white balance mode which allows you to set the temperature while still adjusting red/blue gains on HE130 and UE150.
• Added a 3200K and 5600K white balance for Panasonic cameras in “Auto” mode.
• It’s now possible to adjust the optic properties by using the mouse wheel when the cursor is above them. Pressing the shift key will adjust the value by 10% of the range of any control.
• Added access to the web interface of the HE130 in the settings
• Duplicating a data bank will change the name slightly
• The button to exit full screen is larger

BUGFIXES

Pilot (beta)

• Fixed optic properties being recalled when preparing a subsequence even if the optic recall option was disabled

Radio

• Attempt at reducing the chance of a scene being taken incorrectly when a radio message happens almost immediately after a scene is taken automatically due to a GPI message
• Fixed losing the current scene set when entering the settings and no automation was declared (introduced in 9.5.4)

Composer

• Fixed non respected default mute state on dynamic playlist in compositions

---

Version 9.5.5 - 2021/05/12

FEATURES

Pilot (beta)

• Added data bank duplication
• Added a safe frame / visor overlaid in the preview. This is activable by re-clicking in the preview of a piloted camera.
• Added a full screen preview. It includes the aforementioned safe frame / visor by also clicking on it.
• Added web pages of connected devices in the settings
• Replaced MAN/AUTO buttons by switches in the optic controls
• Added a button to display advanced camera controls (same as the one available in Studio)
• Added a preview-less mode, allowing usage of 8 presets

BUGFIXES

Common

• Fixed being able to get the input assignation flow stuck when trying to bind the space key under certain conditions. It is now no longer possible to use space, return or escape key.
• Fixed a crash that could sometime occur when assigning the return key to an input function.

Pilot (beta)

• Fixed a crash introduced in 9.5.4 triggered by exiting the Pilot module from the Room selection page

Radio

• Fixed crash when trying to overwrite a preset bound to a non-existent camera number (this could happen when removing a camera from your room)

Radio/Conf

• Fixed a crash due to adding a new microphone to the embedded Audio Detector after a successful initial configuration.

---

Version 9.5.4 - 2021/05/03

FEATURES

Common

• Improved startup time of records (ISO recs included) and streams for most standard cases

Radio/Conf

• It is now possible to see what error is detected on a camera (either no video signal, or no communication, or both) by clicking on the /!\ icon displayed in any of those cases beside the camera

Radio

• Netia users will now be able to use the NEXT program info to preload a clip.
• Slightly improved GPI configuration UI: we added a few labels to make it a bit more readable

Conf

• Added support for Bosch Dicentis Wireless system

Pilot (beta)

• Reworked how configuration and banks are stored, so that changing a camera model or slider model will create a new blank slate

BUGFIXES

Common

• Fixed potentially losing the audio previews settings when doing a particular manipulation in the Settings
• Added missing Server assembly to the installer (bug introduced in 9.5.3)

Conf

• Fixed a bug in Bosch CCS 1000D that made it unable to reconnect properly if CONF is started without the system being available (offline or unplugged from the network)

Radio

• Fixed the linker’s video preview not showing the correct scene after changing the selected scene set

InSitu

• Fixed video inputs’ names not being correctly displayed in Masks and Sources interfaces

 

---

Version 9.5.3 - 2021/04/19

FEATURES

Common

• Our installer now supports silent mode (no UI shown); invoke it with ‘/q’ or ‘/quiet’ to hide all prompts and UIs
• Added a button to reset the Pan/Tilt control on all cameras at once.
• Multicam dependencies version is now checked to be precisely the one wanted when installing a full package to avoid bad surprises when downgrading a machine.

Radio/Conf

• These modules can now be started with an unplugged camera without any warning and without breaking your configuration. If camera control is unavailable, all you’ll have to do is fix the camera-related issue, then redetect the cameras from within radio without interrupting your show. An error message is still shown and blocking if another PTZ camera is found instead of the expected one.

Radio

• Linker settings page will always open as expanded by default.

Conf

• The default AI mode will now be Rich Director instead of Quick director since most setup have more seats than cameras.

API

• Renamed our Multicam.ApiClient assembly to Multicam.Api.Client for consistency

BUGFIXES

InSitu

• Fixed a display issue that could happen when trying to access the “MASKS” window with a computer running a German locale.

Assist

• Fixed a crash that could happen when running embedded in Studio or Radio and the active scene sets changes too quickly

---

Version 9.5.2 - 2021/03/22

FEATURES

Common

• Updated shared folder user informations. Please update Debriefing to this version if you update your InSitu with this one.
• Default streaming catalog is now saved as soon as it is created

Conf

• Added support for Televic Confidea G3 system

BUGFIXES

Composer

• Removed “Auto-play” option on dynamic medialist (those fed from Radio metadata)

---

Version 9.5.1 - 2021/03/08

FEATURES

Common

• Added auto-framing support for Panasonic AW-UE70 and AW-UE150
• Added support for Sony BRC-X400
• Added profile and level selector to GPU-encoded H264 advanced streaming settings
• Removed no longer supported RTMP codecs (only H264 is now available) and removed FMLE from installer
• Added a button to refresh the video input devices if Multicam was started with no supported inputs enabled (eg. without Blackmagic drivers)
• Added a warning under AUX recording options to explain that GPU encoded streams may affect the number of AUX recs running
• Updated License to update year to 2021

Pilot (beta)

• If a sequence’s preset has auto-focus enabled, the whole sequence will be played with auto-focus

Titler

• Added an option to force text to be displayed in upper case in text zones

BUGFIXES

Common

• Fixed crash that could happen when trying to re-use a VOD facebook stream
• Fixed crash that would happen when trying to use a “Windows Media” stream
• Fixed incorrect audio gain that could be applied when un-muting

Radio/Conf

• The SHOT ADJUST feature is now working as expected even when actions on live camera are disabled (toggle in the input settings)

Studio

• Fixed a composition’s output type area being remembered after Studio has been closed and restarted

E-Learning

• Fixed crash that would happen when closing the module while a preset is being recalled

---

Version 9.5.0 - 2021/02/22

FEATURES

Common

• Updated video engine to 2.4.0.12239 (Note: requires BlackMagic Desktop Video drivers 11.7)
• All files used in a Medialist are now locked (this makes it impossible to move, remove or rename a file in Windows’ explorer that could be played from Multicam)
• Added a warning when a Scenes file uses more than one Titler file or Composer file. If you have this message, please adjust your files so that the Scene set only needs a unique Titler file and a unique Composer file

Radio/Conf

• Added a prompt to enable auto-titling directly from the live Radio/Conf UI on a speaker if no speaker is compatible yet

Titler

• Drag & drop a group in the elements list (and reciprocally) is now forbidden

API

• Added a route to get the current mixer state in a richer format than only a string

BUGFIXES

Common

• Fixed mCam II showing a corrupted name in the NDI sources’ list selector
• Fixed a media showing a live indicator even if it couldn’t be read (this could happen previously if moving/deleting a file after having added it to a medialist)
• Fixed a crash in the audio mixer when an NDI audio source was setup (was in 9.4.12 hotfix)
• Fixed impossibility to setup audio routing for a PC input source (was in 9.4.12 hotfix)
• Fixed potential desync when trying to move or remove medias in a medialist that is still being loaded (the action won’t be done until it’s fully loaded)

Publisher

• Fixed an error due to trying to rename a file using characters not accepted by Windows. This would result in a publication stuck indefinitely on the “RENAMING” step

Radio/Conf

• Fixed not being able to edit an auto-titling speaker when there is one scene in the scenes file and it is not currently live
• Fixed changing the scene set not switching the linker configuration
• Editing a live scene no longer removes all titler element from the PGM
• Fixed taking a scene being possible to go live while the scene set is being loaded. This resulted in an incorrect scene being shown.

Composer

• Added a protection against simultaneously adding and removing a media from a composition’s playlist

Titler

• Fixed a crash happening when trying to select the “BACKGROUND” of a Panel/Speaker group right after having drag and dropped said group

API

• Fixed adding Media items in burst resulting in medias being added in a different order than the desired one
• Fixed the /api/application/startWithRoom/{applicationName}/{roomId} route to do nothing if the current module and the current room are the expected ones
• Fixed the /api/application/startWithRoom/{applicationName}/{roomId} route to exit the current module otherwise

---