TAIDEN configuration

This article will give you the information in order to setup the integration with your Taiden conference system.

Integration with Taiden is carried out through the TCP connection and integration of Taiden protocol. MultiCam receives microphone activity in order to automate video filming.

Configure Taiden

First, you need to switch on the conference system and identify all the mics. Go to the Settings => Number in Taiden interface. After that, all the mics will start to blink. Push the TALK button on each microphone one by one for initialization. And restart the conference system.

Configure MultiCam CONF

Once you have started MultiCam Conf, choose SYSTEM and click START:

Configuration is straight forward: you first pick "Taiden model" as audio-conferencing source and enter its IP address.

Once you press CONNECT, you should see all the microphones in the interface.

Your TAIDEN system is now ready to communicate with multiCAM CONF for automated broadcasting of your conferences!