ATUC-50

User Manual - Audio-Technica ATUC-50

Network settings:

Rotate the jog dial to move “>” to the desired item or value then press the ENTER button to confirm.

->Set Menu Items

            -> 05 IP Setting

                            -> 01 IP Config Mode Auto, Static

                            -> 02 IP Address 0.0.0.0 - 255.255.255.255

                            -> 03 Subnet Mask 0.0.0.0 - 255.255.255.255

                            -> 04 Gateway Address 0.0.0.0 - 255.255.255.255

Multicam settings: 

ATDM-0604

User Manual - Audio-Technica ATDM-0604

Network settings:

Specify how to obtain the IP address.
1. Press the power button.
• The PRESET LED becomes lit.
2. When the PRESET LED starts blinking, press down the MODE
button, the INPUT SEL button for INPUT channel 4 and the
OUTPUT SEL button.
3. When the LEVEL LED becomes lit, release the MODE button, the
INPUT SEL button for INPUT channel 4, and the OUTPUT SEL
button.
4. The volume LED lights according to the IP Config Mode setting.
5. Turn the dial button and change the IP Config Mode.
6. Restart the product
7. The default value is "192.168.33.102".
8. Use a wired or wireless connection to connect the control
device to the product.
9. Turn on the control device and the product.
• If IP addresses are obtained automatically when connecting, it may take
some time before the IP address is set.

Multicam settings: