Multicam Suite is compatible with blackmagic design video router.
This article will give you the information you need to configure the videohub function in multicam suite.
/!\ Adding VIDEOHUB will delete your INPUT configuration /!\
First, you need to open the main settings of the system. Click on the gear in the right bottom corner and enter your password.
ADDING VIDEOHUB :
Go to the AUDIO/VIDEO and choose INPUTS.
Then go to 
.
A popup will open. Enter the VideoHub IP address.
Confirm the configuration deletion warning.
/!\ Adding VIDEOHUB will delete your INPUT configuration /!\
VIDEOhub is now addeding.
VIDEOHUB CONFIGURATION:
Click on 
. A popup will open.
Add a video entry device. 
Choose your device.
Choose your device format .
Choose your input audio format (SDI, Analog XLR or AES/EBU Audio). Click on 
.
Factory configuration :
Choose your Ouput videohub.
In room 1 or Input, click on 
. ( If you don't see Room or input, click on 
).A popup will open.
choose the videoHub input. Select Input from the grid you wish to route. Apply this method on your other inputs.
Configuration example:
Comments
0 comments
Please sign in to leave a comment.